CAM 60148

Positional Magnetic Resonance Imaging (MRI)

Category:Radiology   Last Reviewed:June 2021
Department(s):Medical Affairs   Next Review:June 2022
Original Date:June 2008    

Description:
Positional magnetic resonance imaging (MRI) permits imaging of a patient in various positions, including sitting and standing. This technology is being evaluated as a diagnostic tool for patients with position-dependent back pain.

For individuals who have position-dependent back or neck pain who receive positional MRI, the evidence includes comparative studies. Relevant outcomes are test accuracy, symptoms, functional outcomes and quality of life. Comparisons of results from positional MRI with results from supine MRI or standing X-ray have indicated that positional MRI provides additional diagnostic data. However, we found no studies describing clinical outcomes of patients whose treatments were selected based on these new data. The clinical benefit of basing treatment decisions, including surgery, on these additional findings needs to be established. The evidence is insufficient to determine the effects of the technology on health outcomes.

Background
Determining the cause of back pain is a complex task. In some patients, extensive evaluation with various imaging modalities does not lead to a definitive diagnosis. Some recent studies have suggested that imaging the body in various positions with "loading" of the spine may lead to more accurate diagnoses. This loading can be accomplished by having the patient sit or stand upright. Also, imaging can be completed with the patient in the position that causes the symptom(s). This theory is being evaluated in suspected nerve root compression and in some cases of spondylolisthesis.

An open magnetic resonance imaging (MRI) system has been developed that allows imaging of a patient in various positions. Imaging can be conducted with partial or full weight-bearing. Dynamic-kinetic imaging (images obtained during movement) can also be obtained with this system. Conventional MRI of the spine is typically completed with a patient in a recumbent position. Weight bearing can be simulated by imaging in the supine position with a special axial loading device.

One concern with positional MRI is the field strength of the scanners. Today’s clinical MRI scanners may operate at a field strength between 0.1 to 3 Tesla (T), and are classified as either low-field (<0.5 T), mid-field (0.5-1.0 T) or high-field (>1.0 T). Low-field MRI is typically used in open scanners. Open scanners are designed for use during interventional or intraoperative procedures, when a conventional design is contraindicated (e.g., an obese or claustrophobic patient), or for changes in patient positioning.

In general, higher field strength results in an increase in signal-to-noise ratio, spatial resolution, contrast and speed. Thus, low-field scanners produce poorer quality images compared with high-field scanners, and longer acquisition times with low-field scanners increases the possibility of image degradation due to patient movement. However, field strength has less of an effect on the contrast-to-noise ratio, which determines the extent to which adjacent structures can be distinguished from one another.

Regulatory Status 
Several magnetic resonance imaging (MRI) systems have been cleared for marketing by the U.S. Food and Drug Administration (FDA) through the 510(k) process as open or total body systems for positional imaging. One such system is FONAR’s Upright® MRI. FDA product code: LNH.

Related Policies
60146 Dynamic Spinal Visualization

Policy:
Positional (non-recumbent) magnetic resonance imaging (MRI) is investigational and/or unproven and therefore considered NOT MEDICALLY NECESSARY, including its use in the evaluation of patients with cervical, thoracic or lumbosacral back pain.

Policy Guidelines
Currently, there is no way to signify with coding that a magnetic resonance imaging (MRI) is open or positional. The service would be coded using the CPT code for the MRI scan (e.g., codes 72141-72158 for MRI of the spine, codes 73221-73223 for any joint of the upper extremity).

Benefit Application:
BlueCard®/National Account Issues
State or federal mandates (e.g., FEP) may dictate that all U.S. Food and Drug Administration (FDA)-approved devices may not be considered investigational. FDA-approved devices may only be assessed on the basis of their medical necessity.

Rationale
Evidence reviews assess whether a medical test is clinically useful. A useful test provides information to make a clinical management decision that improves the net health outcome. That is, the balance of benefits and harms is better when the test is used to manage the condition than when another test or no test is used to manage the condition.

The first step in assessing a medical test is to formulate the clinical context and purpose of the test. The test must be technically reliable, clinically valid, and clinically useful for that purpose. Evidence reviews assess the evidence on whether a test is clinically valid and clinically useful. Technical reliability is outside the scope of these reviews, and credible information on technical reliability is available from other sources.

Positional Magnetic Resonance Imaging
Clinical Context and Test Purpose
The purpose of positional magnetic resonance imaging (MRI) in patients with position-dependent back or neck pain is to inform a decision whether the pain can be attributed to changes in the spinal canal. For example, pressure on the spinal cord from a herniated disc may be increased with sitting when compared to standing.

The question addressed in this evidence review is: Does the use of positional MRI improve the net health outcome in patients who have position-dependent back or neck pain?

The following PICOTS was used to select literature relevant to the review.

Patients
The population of interest is patients being evaluated for position-dependent back or neck pain.

Interventions
The intervention is positional MRI using seated or standing positions in neutral, extension, and flexion.

Comparators
The following test is currently being used to make decisions about managing position-dependent back or neck pain:conventional supine MRI, which is the reference standard. Studies comparing positional MRI with loaded supine MRI are also of interest.

Outcomes
In evaluating this approach to imaging, it is important to determine whether MRI adds actionable diagnostic information. However, it is also important to determine whether treatment of these additional findings results in improved outcomes. This additional step is important given reported concerns about described false-positive findings with MRI of the spine. For example, Jarvik et al. (2001) reported that many MRI findings have a high prevalence in subjects without low back pain and that findings such as bulging discs and disc protrusion are of limited diagnostic use.1, They also reported that the less common findings of moderate or severe central stenosis, root compression, and disc extrusion were more likely to be clinically relevant. The health outcomes of interest include symptoms (e.g., pain), self-reported functional outcomes, and quality of life measures.

Timing
The optimum interval to examine health outcomes would be after healing of a surgical intervention, typically at 3 to 12 months postprocedure.

Setting
Positional MRI is administered by referral to a spine specialist in back and neck pain.

Technically Reliable
Assessment of technical reliability focuses on specific tests and operators and requires review of unpublished and often proprietary information. Review of specific tests, operators, and unpublished data are outside the scope of this evidence review and alternative sources exist. This evidence review focuses on the clinical validity and clinical utility.

Clinically Valid
A test must detect the presence or absence of a condition, the risk of developing a condition in the future, or treatment response (beneficial or adverse).

Imaging Under Loading Stress
Dahabreh et al. (2011) conducted a systematic review for the Agency for Healthcare Research and Quality that assessed emerging MRI technologies for musculoskeletal imaging under loading stress.2,Included were 36 studies that used positional weight-bearing MRI in patients with musculoskeletal conditions. Also included were studies evaluating axial compression devices. Most studies were cross-sectional or had case-control designs. The most commonly imaged body region was the lumbar spine. Four identified studies of lumbar spine imaging compared positional weight-bearing MRI with conventional MRI, myelography, or non-weight-bearing imaging in the same MRI device; however, these studies did not report the effect of the technology on patient outcomes. Two studies of foot imaging that compared weight-bearing MRI with MRI in the supine position with the same MRI device found that the 2 techniques provided similar information. Two studies of knee joint imaging found differences between weight-bearing MRI and non-weight-bearing MRI using the same device; no functional outcomes were reported. The potential effect on image quality of low magnetic field strengths (£0.6 tesla [T]) in weight-bearing MRI scanners was not assessed. Key studies not included in the systematic review are described next.

Positional MRI in Neutral, Flexion, and Extension (Kinetic MRI)
Lao et al. (2014) and Lord et al. (2014) both published systematic reviews assessing the literature on positional (kinetic) MRI consists primarily of examining anatomic changes in neutral, flexion, extension, and axial rotation.3,4, For example, kinetic MRI studies in healthy and symptomatic individuals identified changes in neuroforaminal size, cord compression, cord length, cross-sectional area, ligamentum flavum thickness, and motion at the index and adjacent levels.

Seated MRI vs Supine MRI
Ferreiro Perez et al. (2007) compared recumbent with upright sitting positions in 89 patients who had disc herniation or spondylolisthesis (cervical or lumbar spine).5, Using a 0.6-T Upright MRI system for both positions, pathology (disc herniation or spondylolisthesis) was identified in 68 (76%) patients. Images from 18 (20%) patients were not interpretable due to motion artifact. Pathologic features were better identified (i.e., either only evident or seen to be enlarged) in 52 (76%) of the 68 patients when in the sitting position; 10 of these were only observed in the sitting position. Pathologic features were better identified in the recumbent position in 11 (16%) of the 68 patients. The overall underestimation rate was calculated to be 62% for patients in the recumbent position and 16% for those in the upright-seated position. This research would suggest that there may be advantages when the position during imaging is matched with the positional symptoms of the patient. However, a more appropriate comparison group would be a standard recumbent clinical MRI system (e.g., field strength >0.6 T). In addition, technical problems with motion artifact were due to poor stabilization in an upright sitting position.

Standing MRI vs Supine MRI
In a study by Tarantino et al. (2013), 57 patients with low back pain when standing (50% also had back pain in the supine position) received an MRI in both upright and recumbent positions using a 0.25-T tilting system.6, A table tilt of 82° was used to reproduce the orthostatic position without the patient instability associated with standing at 90°. Compared with the supine position, there was a significant decrease in intervertebral disc thickness (11.2 mm vs 12.9 mm) along with changes in other measures and a qualitative increase in the volume of disc protrusions and/or spondylolisthesis in the upright position.

Standing MRI vs Axial Loaded Supine MRI
A study by Madsen et al. (2008) compared vertical (standing) MRI with recumbent MRI plus axial loading in patients who had lumbar spinal stenosis.7, Sixteen patients with neurogenic claudication, experienced mainly during walking or in an erect position, were recruited for this phase of the study. Each patient underwent 4 scans with a 0.6-T Upright MRI system, consisting of vertical, horizontal with compression at a load of 40% of body weight, horizontal with no load, and horizontal with a 50% axial load. All horizontal scans were conducted with a cushion placed below the lower back to induce extension of the lumbar spine. Results showed similar dural sac cross-sectional area between the 2 positions, suggesting that the standing position might be adequately simulated while recumbent by axial loading and lordosis. Results were not correlated with patient symptoms in this study.

Clinically Useful
A test is clinically useful if the use of the results informs management decisions that improve the net health outcome of care. The net health outcome can be improved if patients receive correct therapy, or more effective therapy, or avoid unnecessary therapy, or avoid unnecessary testing.

Direct Evidence
Direct evidence of clinical utility is provided by studies that have compared health outcomes for patients managed with and without the test. Because these are intervention studies, the preferred evidence would be from randomized controlled trials.

No evidence from randomized controlled trials was identified to support the use of positional MRI for position-dependent back or neck pain. Moreover, the systematic review by Dahabreh et al. (2011) concluded that, despite a large number of available studies, considerable uncertainty remained about the utility of this technique for the clinical management of musculoskeletal conditions.2,

Chain of Evidence
Indirect evidence on clinical utility rests on clinical validity. If the evidence is insufficient to demonstrate test performance, no inferences can be made about clinical utility.

Because the clinical validity of positional MRI for diagnosis of position-dependent back or neck pain has not been established, a chain of evidence cannot be constructed.

Summary of Evidence
For individuals who have position-dependent back or neck pain who receive positional MRI, the evidence includes comparative studies. Relevant outcomes are test accuracy, symptoms, functional outcomes, and quality of life. Comparisons of results from positional MRI with results from supine MRI or standing x-ray have indicated that positional MRI provides additional diagnostic data. However, no studies have been identified describing clinical outcomes of patients whose treatments were selected based on these new data. The clinical benefit of basing treatment decisions, including surgery, on these additional findings needs to be established. The evidence is insufficient to determine the effects of the technology on health outcomes.

Clinical Input From Physician Specialty Societies and Academic Medical Centers
While the various physician specialty societies and academic medical centers may collaborate with and make recommendations during this process, through the provision of appropriate reviewers, input received does not represent an endorsement or position statement by the physician specialty societies or academic medical centers, unless otherwise noted.

In response to the requests, input was received from 1 physician specialty society and 1 academic medical center while the policy was under review in 2008. Both reviewers agreed that positional magnetic resonance imaging is considered investigational.

Practice Guidelines and Position Statements
No guidelines or statements were identified.

U.S. Preventive Services Task Force Recommendations
Not applicable.

Ongoing and Unpublished Clinical Trials
A search of ClinicalTrials.gov in July 2019 did not identify any ongoing or unpublished trials that would likely influence this review.

References:   

  1. Jarvik JJ, Hollingworth W, Heagerty P, et al. The Longitudinal Assessment of Imaging and Disability of the Back (LAIDBack) Study: baseline data. Spine (Phila Pa 1976). May 15 2001;26(10):1158-1166. PMID 11413431
  2. Dahabreh IJ, Hadar N, Chung M. Emerging magnetic resonance imaging technologies for musculoskeletal imaging under loading stress: scope of the literature. Ann Intern Med. Nov 1 2011;155(9):616-624. PMID 22041950
  3. Lao LF, Zhong GB, Li QY, et al. Kinetic magnetic resonance imaging analysis of spinal degeneration: a systematic review. Orthop Surg. Nov 2014;6(4):294-299. PMID 25430713
  4. Lord EL, Alobaidan R, Takahashi S, et al. Kinetic magnetic resonance imaging of the cervical spine: a review of the literature. Global Spine J. Jun 2014;4(2):121-128. PMID 25054099
  5. Ferreiro Perez A, Garcia Isidro M, Ayerbe E, et al. Evaluation of intervertebral disc herniation and hypermobile intersegmental instability in symptomatic adult patients undergoing recumbent and upright MRI of the cervical or lumbosacral spines. Eur J Radiol. Jun 2007;62(3):444-448. PMID 17412542
  6. Tarantino U, Fanucci E, Iundusi R, et al. Lumbar spine MRI in upright position for diagnosing acute and chronic low back pain: statistical analysis of morphological changes. J Orthop Traumatol. Mar 2013;14(1):15-22. PMID 22983676
  7. Madsen R, Jensen TS, Pope M, et al. The effect of body position and axial load on spinal canal morphology: an MRI study of central spinal stenosis. Spine (Phila Pa 1976). Jan 1 2008;33(1):61-67. PMID 18165750 

Coding Section 

Codes Number Description
CPT   No specific code
ICD-9 Diagnosis   Investigational for all diagnoses
ICD-10-CM ( effective 10/01/15)  

Investigational for all diagnoses

  M45.0-M45.9

Ankylosing spondylitis code range

  M47.01-M47.9

Spondylosis code range

  M50.00-M50.93

Cervical disc disorders code range

  M51.04-M51.9

Thoracic, thoracolumbar, and lumbosacral intervertebral disc disorders code range

  M54.00-M54.9

Dorsalgia code range

ICD-10-PCS (effective 10/01/15)  

ICD-10-PCS codes are only used for inpatient services. There is no specific ICD-10-PCS code for this imaging. The following codes might be used.

 

BR30Y0Z, BR30YZZ, BR30ZZZ, BR31Y0Z, BR31YZZ, BR31ZZZ, BR32Y0Z, BR32YZZ, BR32ZZZ, BR33Y0Z, BR33YZZ, BR33ZZZ, BR37Y0Z, BR37YZZ, BR37ZZZ, BR39Y0Z, BR39YZZ, BR39ZZZ

 
Type of Service    
Place of Service    

Procedure and diagnosis codes on Medical Policy documents are included only as a general reference tool for each policy. They may not be all-inclusive. 

This medical policy was developed through consideration of peer-reviewed medical literature generally recognized by the relevant medical community, U.S. FDA approval status, nationally accepted standards of medical practice and accepted standards of medical practice in this community, Blue Cross and Blue Shield Association technology assessment program (TEC) and other non-affiliated technology evaluation centers, reference to federal regulations, other plan medical policies and accredited national guidelines.

"Current Procedural Terminology© American Medical Association.  All Rights Reserved" 

History From 2014 Forward     

06/02/2021 

Annual review, no change to policy intent. 

06/01/2020

Annual review, no change to policy intent. 

06/03/2019 

Annual review, no change to policy intent. Updating rationale and references. 

06/07/2018 

Annual review, no change to policy intent. 

06/08/2017 

Annual review, no change to policy intent. Updating background, description, regulatory status, rationale and references 

06/01/2016 

Annual review, no change to policy intent. Updating background and description. 

06/18/2015 

Annual review, no change to policy intent. Updated background, description, rationale and references. Added guidelines and coding. 

06/03/2014

Annual review. Added related policy. Updated rationale and references. No change to policy intent.


Go Back